CONNECTORS

High quality DC SPD DC surge protector type2 3P 1000VDC device. Surge protective device, protect against lighting surge voltages in solar system (photovoltaic power supply system). These units must be installed in parallel on the DC networks to be protected and provide common and different modes protection. Its installed location is recommended at both ends of the DC power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long. High energy MOVs equipped with specific thermal disconnectors and related failure indicators. Indicator window is obvious (green is OK, red indicates failure) Fully enclosed terminal The shell is made of PC flame retardant material, fire insulation. Replaceable module.

• Good conductivity: This surge protector uses copper fittings for good electrical conductivity.
• Long service life: The product is manufactured with precision electronic components for longer life and more stable performance.
• Simple installation: This household surge protector is installed with 2P rails, mounted on standard 36MM rails, and used in conjunction with circuit breakers in the distribution box. Installation is very simple.
• High safety: The outer casing of the arrester is made of PC flame retardant material and is safer to use.
• Simple and convenient: The product is modular in design and easy to use and maintain.

FEEO FPV-63 series of DC Mini Circuit Breaker (DC MCB) is designed for solar system. Rated current contains 6A,10A,16A,20A,25A,32A,40A,50A,63A. Rated voltage of 2Poles is 800VDC or 550VDC.

FEEO FDS-32 series of DC FUSE is designed for solar system. Fuse holder (fuse base) with indicator light is used for 1A-32Amp,1000VDC.

• • MOUNTING:10 x 38 mm Midget Fuse Holder with blown fuse indication, 1 Pole.
  • CERTIFICATION: UL listed, and CSA Certified as Photovoltaic fuse holders.
  • FUNCTION: Rated at 30 Amps at 1000VDC, Interrupting Rating of 30,000 DC Amps.
  • INSTALLATION: Easy fuse access, installation and removal.
  • CONVENIENT: Easy to wire screw clamp connections.

Hot new solar power grid double power source automatic switch 2 p 3 p AP ATS photovoltaic (pv) power to the city power system

• Complete Protection Function: This auto transfer switch supports a variety of protection functions, including short circuit, overload, lack of phase, under voltage protection.
• EPS Fire Power Supply: This dual power automatic transfer switch adopted EPS fire power supply interface, DC12-24v can reliably long-distance double point.
• Automatic And Manual: This automatic switch not only supports auto mode, also can be operated by manual button, simple operation and reliable performance.
• Wide Applications: This dual power generator changeover switch can be used for home and public places. Especially suitable for office buildings and public places which require firefighting.
• Easy Installation:2P 220V 63A dual power auto circuit breaker can be installed vertically, or horizontally power supply is easy to install and reliable.z

FEEO 2P FSP-D40 series of DC Surge Arrester (DC SPD) is designed for solar system. Discharge current range from 20KA to 40KA. Rated of 2Poles can reach 600VDC, even can be customized to 12VDC,24VDC,48VDC. FEEO 2P FSP-D40 series of DC Surge Arrester (DC SPD) is designed for solar system. Discharge current range from 20KA to 40KA. Rated of 2Poles can reach 600VDC, even can be customized to 12VDC,24VDC,48VDC. Type 2 surge protective device for Photovoltaic VG-Technology Up to 1500 Vdc No leakage, no operating currents Impulse currents Iimp/Itotal : 5/10kA @ 10/350 us Common and Differential Mode protection Plug-in modules Remote Signaling (option) EN 50539-11 compliance

• Good conductivity: This surge protector uses copper fittings for good electrical conductivity.
• Long service life: The product is manufactured with precision electronic components for longer life and more stable performance.
• Simple installation: This household surge protector is installed with 2P rails, mounted on standard 36MM rails, and used in conjunction with circuit breakers in the distribution box. Installation is very simple.
• High safety: The outer casing of the arrester is made of PC flame retardant material and is safer to use.
• Simple and convenient: The product is modular in design and easy to use and maintain.

FPV-125 high breaking capacity circuit breaker is specially for solar PV system. The current is form 63A to 125A and voltage up to 800VDC. Standard according to IEC/EN60947-2.

FPV-125 high breaking capacity circuit breaker is specially for solar PV system. The current is form 63A to 125A and voltage up to 550VDC. Standard according to IEC/EN60947-2.

Hot new solar power grid double power source automatic switch 2 p 3 p AP ATS photovoltaic (pv) power to the city power system

• Complete Protection Function: This auto transfer switch supports a variety of protection functions, including short circuit, overload, lack of phase, under voltage protection.
• EPS Fire Power Supply: This dual power automatic transfer switch adopted EPS fire power supply interface, DC12-24v can reliably long-distance double point.
• Automatic And Manual: This automatic switch not only supports auto mode, also can be operated by manual button, simple operation and reliable performance.
• Wide Applications: This dual power generator changeover switch can be used for home and public places. Especially suitable for office buildings and public places which require firefighting.
• Easy Installation:2P 220V 63A dual power auto circuit breaker can be installed vertically, or horizontally power supply is easy to install and reliable.

FEEO AC Surge arrester (SPD) FSP-A 4Poles is designed for protecting triple phase equipment or systems from the lightning. Discharge current range from 5KA to 100KA.

• Good conductivity: This surge protector uses copper fittings for good electrical conductivity.
• Long service life: The product is manufactured with precision electronic components for longer life and more stable performance.
• Simple installation: This household surge protector is installed with 2P rails, mounted on standard 36MM rails, and used in conjunction with circuit breakers in the distribution box. Installation is very simple.
• High safety: The outer casing of the arrester is made of PC flame retardant material and is safer to use.
• Simple and convenient: The product is modular in design and easy to use and maintain.