DC SURGE PROTECTION

FEEO 2P FSP-D40 series of DC Surge Arrester (DC SPD) is designed for solar system. Discharge current range from 20KA to 40KA. Rated of 2Poles can reach 600VDC, even can be customized to 12VDC,24VDC,48VDC. FEEO 2P FSP-D40 series of DC Surge Arrester (DC SPD) is designed for solar system. Discharge current range from 20KA to 40KA. Rated of 2Poles can reach 600VDC, even can be customized to 12VDC,24VDC,48VDC. Type 2 surge protective device for Photovoltaic VG-Technology Up to 1500 Vdc No leakage, no operating currents Impulse currents Iimp/Itotal : 5/10kA @ 10/350 us Common and Differential Mode protection Plug-in modules Remote Signaling (option) EN 50539-11 compliance

• Good conductivity: This surge protector uses copper fittings for good electrical conductivity.
• Long service life: The product is manufactured with precision electronic components for longer life and more stable performance.
• Simple installation: This household surge protector is installed with 2P rails, mounted on standard 36MM rails, and used in conjunction with circuit breakers in the distribution box. Installation is very simple.
• High safety: The outer casing of the arrester is made of PC flame retardant material and is safer to use.
• Simple and convenient: The product is modular in design and easy to use and maintain.

FEEO 2P FSP-D40 series of DC Surge Arrester (DC SPD) is designed for solar system. Discharge current range from 20KA to 40KA. Rated of 2Poles can reach 600VDC, even can be customized to 12VDC,24VDC,48VDC. FEEO 2P FSP-D40 series of DC Surge Arrester (DC SPD) is designed for solar system. Discharge current range from 20KA to 40KA. Rated of 2Poles can reach 600VDC, even can be customized to 12VDC,24VDC,48VDC. Type 2 surge protective device for Photovoltaic VG-Technology Up to 1500 Vdc No leakage, no operating currents Impulse currents Iimp/Itotal : 5/10kA @ 10/350 us Common and Differential Mode protection Plug-in modules Remote Signaling (option) EN 50539-11 compliance

• Good conductivity: This surge protector uses copper fittings for good electrical conductivity.
• Long service life: The product is manufactured with precision electronic components for longer life and more stable performance.
• Simple installation: This household surge protector is installed with 2P rails, mounted on standard 36MM rails, and used in conjunction with circuit breakers in the distribution box. Installation is very simple.
• High safety: The outer casing of the arrester is made of PC flame retardant material and is safer to use.
• Simple and convenient: The product is modular in design and easy to use and maintain.

High quality DC SPD DC surge protector type2 3P 1000VDC device. Surge protective device, protect against lighting surge voltages in solar system (photovoltaic power supply system). These units must be installed in parallel on the DC networks to be protected and provide common and different modes protection. Its installed location is recommended at both ends of the DC power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long. High energy MOVs equipped with specific thermal disconnectors and related failure indicators. Indicator window is obvious (green is OK, red indicates failure) Fully enclosed terminal The shell is made of PC flame retardant material, fire insulation. Replaceable module.

• Good conductivity: This surge protector uses copper fittings for good electrical conductivity.
• Long service life: The product is manufactured with precision electronic components for longer life and more stable performance.
• Simple installation: This household surge protector is installed with 2P rails, mounted on standard 36MM rails, and used in conjunction with circuit breakers in the distribution box. Installation is very simple.
• High safety: The outer casing of the arrester is made of PC flame retardant material and is safer to use.
• Simple and convenient: The product is modular in design and easy to use and maintain.

High quality DC SPD DC surge protector type2 3P 1000VDC device. Surge protective device, protect against lighting surge voltages in solar system (photovoltaic power supply system). These units must be installed in parallel on the DC networks to be protected and provide common and different modes protection. Its installed location is recommended at both ends of the DC power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long. High energy MOVs equipped with specific thermal disconnectors and related failure indicators. Indicator window is obvious (green is OK, red indicates failure) Fully enclosed terminal The shell is made of PC flame retardant material, fire insulation. Replaceable module.

• Good conductivity: This surge protector uses copper fittings for good electrical conductivity.
• Long service life: The product is manufactured with precision electronic components for longer life and more stable performance.
• Simple installation: This household surge protector is installed with 2P rails, mounted on standard 36MM rails, and used in conjunction with circuit breakers in the distribution box. Installation is very simple.
• High safety: The outer casing of the arrester is made of PC flame retardant material and is safer to use.
• Simple and convenient: The product is modular in design and easy to use and maintain.